The  Street Washers is divided into large and small according to the individual size, we now only say small, do not talk about large. With the continuous advancement of the marketization process of sanitation, more and more sanitation departments are competing to purchase Small Street Washers Vehicles. Because they have the advantages of powerful function, flexibility, practicality and low price, they are loved by the majority of sanitation property and other departments.

After all, the Street Washers is mechanical equipment. In the process of use, there will often be small problems like this or that, such as failure of the engine. Learning how to deal with this small problem has become a compulsory course for every sanitation cleaning equipment personnel. Xiaobian here sorted out some high pressure cleaning car engine can not fire treatment methods, I hope to help you.

1. Check whether the engine carburetor switch is open.

If the carburetor switch is off, we need to put the carburetor switch in the on state, to ensure that the engine fuel.

2. Put the oil in the carburetor to see if there is gasoline flowing out.

If the carburetor starts normally and still doesn't fire, we need to use a wrench to unscrew the carburetor to see if there is gasoline flowing out. If there is gasoline flow, it means the oil line is normal.

3, check whether the spark plug has carbon deposit black.

If there is no problem with the oil line, we will use the spark plug wrench to unscrew the spark plug to see if there is carbon deposit black, if there is carbon deposit black, we need to replace a new spark plug.

4, replace the new spark plug to try whether normal ignition.

Replace the spark plug, put the spark plug on the cap of the pressure pack, put it on the chimney, leave some distance, ignition try. If there is a spark, the ignition is not a problem, just put the spark plug into the engine.

5, replace the new spark plug can not be normal ignition, need to remove the oil alarm line.

If you put on a new spark plug or there is no spark, there may be a problem with the oil alarm line, you need to remove the oil alarm line. There is a small four square in the back of the engine, and the thumb finger is about the same size, there are two lines on the square block, a yellow line (oil detection line), a black line (flameout line), there are interfaces between the two lines, directly pull out.