Push vacuum leaf suction machine has two working modes. The suction port at the bottom of the machine collects the fallen leaves, and the hand-held straw collects the fallen leaves.

The frame of the hand-push leaf collector adopts an integrated curved beam structure, which is firm and suitable for various complex road surfaces. There are two solid tires front and rear, and the front swivel wheel guides and adjusts the ground clearance of the air intake.

The vehicle is equipped with high and low gears for easy driving on slopes.

The frame of the hand-push leaf collector has an integrated curved beam structure, and the structure is firm and solid, and is suitable for various complex road surfaces. There are two solid tires forward and backward, and the front universal wheel is used for guiding and adjusting the ground clearance of the suction port.

Zongshen Power 5.5 horsepower engine, start mode is manual + electric start

The fuel tank is 3.6 liters

The front suction opening is made of rotomolded material.

The width of the suction port is 600~800mm, the width is 120~200mm, and the height of the suction port is adjustable

Equipped with a pressurized rubber strip to increase negative pressure and suction.

An extension pipe is installed at the air suction port to absorb the fallen leaves and garbage in the green belt.

Quick replacement of garbage bags with a capacity of 200L; portable installation hooks, connected to the air outlet of the arc structure;

The speed is 1.98KM per hour.

The fixing method of the front garbage box adopts a portable design, which can quickly replace the woven bag. It is equipped with a portable installation hook, which can be easily connected with the air outlet of the curved structure. The upper part of the garbage bag is a quadrilateral frame and is equipped with a sealing strip, which is convenient for replacement and has a sealing performance. Good, effectively control the dust.