The Electric Street Sweeper mainly relies on the brush to clean the garbage. The quality of the brush of the sweeper determines whether the cleaning effect of the Electric Street Sweeper can meet the due standard. Therefore, in the process of use, we should clean the brush in time and check the wear of the brush. Usually, many customers have considered this problem at the early stage of purchase. Whether it is necessary to replace the brush often and how often to replace the brush.

1. According to the use of our customers, usually a set of sweeping machine brush is used for about three months, which is the average situation, and there are differences according to different use conditions.

2. The brush loss of Electric Street Sweeper , as well as the roughness of the ground, plays a decisive role in the speed of brush wear, so the most reasonable replacement plan is determined according to the actual wear. When the bristles are less than 8CM, the user can consider replacing them, so as not to have a bad cleaning effect.

3. The material of the brush is also particular. It is suggested that customers had better choose the original brush, which has reliable wear resistance, longer service life and is more conducive to controlling the cleaning cost.

4, the use time of the Electric Street Sweeper  to decide, some places may only need one or two hours a day to complete the cleaning, such a property neighborhood sweeper wear is relatively small, if every day is heavily used, the brush wear speed is bound to be much faster.

In any case, the brush wear is serious, it is necessary to replace the new brush, so as not to affect the use effect. In addition, the process of replacing the brush of the  Electric Street Sweeper  is as follows: take out the dustbin, and then unscrew the dust baffle on the left side, unscrew the nuts in the middle and the hexagonal bolts at both ends, and finally unscrew the bolts fixing the balance swing arm and semi-circular baffle, so as to pull out the brush. To install a new brush, simply install the machine in reverse order. When installing the brush of the road driving sweeper, the screw must be tightened, otherwise the rotation of the brush may be affected, and the cleaning effect will not be good.