High Pressure Street Cleaning Vehicle Operation Process

➊ engine check

Before starting each shift, we must first check the engine oil level and develop good use habits to protect the engine.

Inspection of waterway

Open the water valve in front of the water filter to provide sufficient water for the high pressure pump. To protect the engine.

Inspection of valves

Open the high-pressure water nozzle switch to ensure smooth water outlet (open the three-way valve in the middle of the handlebar, and turn to the right side for hand-held high-pressure grab).

Starting the engine

Step 1: Turn on the oil circuit switch of the carburetor (ie: push it inside).

Step 2: Turn off the damper switch (i.e., the white damper switch to the outside).

Step 3: Turn the throttle size adjustment handle to the middle position.

Step 4: Start the engine ignition switch. After the engine starts for 10 seconds, open the damper (i.e. push the white damper switch inside).

❺ Turn off the engine

The first step: stop the engine throttle down first before closing the flameout switch, to avoid the gasoline in the carburetor combustion, resulting in the phenomenon of firing.

Step 2: After flameout, turn off the carburetor oil circuit switch (i.e. push the switch inside).

Pay attention to

There must be no pressure in the pipe after shutdown. Method: After shutdown, open the door high-pressure valve pressure relief, open the high-pressure spray gun pressure relief.

The above is the operation process of the High Pressure Street Cleaning Vehicle