Small electric garbage trucks have become a widely used means of transport for daily cleaning, and the motor is a very important part of small electric garbage trucks, so how do we maintain it?

1. About wading and high temperature

Avoid water, the motor does not have a good waterproof function due to the outlet and seal, and the water can not exceed the position of the rear wheel axis when driving, otherwise it is easy to burn the motor after water.

High temperature risk, motor heating temperature is too high will make the magnetic steel degaussing. What is more dangerous is that the pressure difference after cooling will draw water vapor and dust into the motor, resulting in fast energy consumption and weak drive.

2, please do not overload

Overload of electric garbage truck may cause motor and circuit overload, resulting in scalding, affecting the service life, and serious will cause the motor to burn off immediately.

Electric garbage truck under heavy load is easy to run out of air in the rear tire under the condition of insufficient pressure, resulting in the motor running into a hard object is easy to damage the motor.

3. About exceptions and jitter

If the motor is hot, smoking, smelly, abnormal or other abnormal, it should be sent to the nearest Jinhuan after-sales shop for treatment. Do not disassemble the motor by yourself.

Motor jitter can not work or rotation weakness and loud noise, continue to ride easy to burn the controller or circuit, please ask for professionals or consult after sale.

4, about motor maintenance

Pay attention to maintain sufficient voltage of the battery to prevent the motor from burning due to insufficient voltage, resulting in accelerated aging of the motor. Check the fasteners installed on the rear fork of the hub, and tighten the nut in time if it is found to be loose. Do not spray directly with water when removing dust and sludge from the outside of the motor to prevent sludge, moisture and dust from entering the inside of the motor.