Steps For Loading And Unloading Garbage In Garbage Trucks

       The  sanitation garbage truck  can pull the garbage in the underground garbage can and the garbage can to the vehicle together and transport it away at the same time, which can be self-unloading, reducing the labor intensity of workers. The transportation method of this garbage truck is currently widely used garbage transportation method, which can realize multiple boxes in one vehicle, greatly reduce the configuration cost and space, etc. The function of its special device is powered by the automobile engine, and is controlled manually and electrically by the hydraulic mechanism. accomplish. The vehicle box adopts a high-quality carbon steel plate fully sealed welded structure, which has the advantages of high strength, light weight, and no secondary pollution.

Before loading garbage, when the no-load reaches 6 standard air pressure, hang up the power take-off (the lower left of the steering wheel in the cab), check whether the parts are leaking or abnormal, and then operate according to the indicated position of the operation sign; the specific operation steps are as follows:

Pull up the trash can

   One: Push the lock hook operating handle to the recovery position, the lock cylinder is recovered, the lock hook is recovered, and the flip frame and the attached frame are locked and fixed;

   Two: Pull the operating handle of the pull arm to the extended position, the pull arm oil cylinder extends, the movable pull arm rotates around the front hinge axis of the flip frame, the pull arm is located at the hook box position, adjust the height of the pull arm hook appropriately, and align the body hook;

  Three: When the pull arm hooks to the box hook, continue to push the pull arm operating handle to the drop position, so that the garbage can continue to get on the car (Note: Make sure that the longitudinal beam of the garbage can is located between the two rear rollers at the rear of the attached frame);

  Four: When the trash can falls on the attached frame, loosen the operating handle of the pull arm to make it return to the neutral position, then pull the operating handle of the lock hook to the locked position, the locking cylinder is extended, the locking frame is turned up, and the The flip frame is locked and fixed with the trash can, and the handle is released to make it return to the neutral position;

   Five: Before unloading the garbage, when the whole vehicle runs to 6 standard air pressure, hang up the power take-off, open the locking device of the rear door of the garbage can, and at the front-stage two-way multi-way valve, first make sure that the locking frame locks the garbage. (Pull the operating handle of the locking hook to the locking position), then pull the operating handle of the pulling arm to the extended position, and the garbage can will tilt and lift the garbage to discharge.