Small street  sweepers are widely used in factories, factories and other public areas. The use and operation of sweepers has also become a concern of many users. What problems should be paid attention to when using small sweepers in factories?

The following aspects should be paid attention to when using the small sweeper:

1. Do not use the small sweeper in a humid environment to prevent the motor from getting damp and affecting subsequent use.

2. In order to improve the cleaning efficiency, the side brush is completely attached to the ground.

3. Small sweeping words should not be used continuously for a long time. If the fuselage feels overheated, it should stop working to prevent the motor from overheating and burning out the motor;

4. Regularly clean the filter of the small sweeper to prevent dust from affecting the normal vacuuming effect. It should be cleaned immediately after use to prevent the sweeper from not working normally.

5. During daily cleaning, the side brush should not be entangled by rope-like objects. If the cleaning is not clean, the motor will be overheated due to excessive load, which will affect the service life of the motor. In severe cases, the motor will be directly burned.

6. After cleaning the ground each time, clean up the garbage and dust in the garbage can in time to prevent a large amount of garbage or dust from depositing to affect the next cleaning effect;

7. Regularly check whether there are sundries in the motor and clean it up in time. If it is found that the carbon brush of the motor inside the sweeper is short-circuited, it should be replaced in time;

8. When the sweeper is in the sweeping workshop, it should drive slowly to prevent damage to the machine caused by encountering sharp objects.