Road Sweeper Equipment  is widely used in municipal sanitation cleaning. This kind of equipment can not only complete the road sanitation cleaning work, but also be equipped with spray device to inhibit dust. So what is the specific work flow of the Road Sweeper Equipment? The following Baiyi is a brief introduction for you.

1. The road sweeper will sweep the garbage to the position of the main brush through the side brush, and then the main brush will sweep to the position of the suction cup, and the garbage will be directly sucked into the bin through the suction mouth.

2, the filter mainly plays the role of filtering dust, in the process of cleaning to avoid dust exclusion secondary dust, while endangering the health of the operator.

3, road sweeper is equipped with a high-power suction motor, can directly suck the garbage into the filter, in the process of use need to be cleaned regularly, in the process of equipment work every 15 minutes can start a dust device, so that the machine in the process of long-term use will not appear blockage.

4. The power source of road sweeper is mainly electric power and fuel power. Electric power equipment is more widely applicable, and there is no great restriction on the use environment. Fuel-powered equipment will produce certain pollution emissions in the process of use, so some areas with strict requirements for pollution emissions can not use this kind of equipment.

5. If the car owner of road cleaning obtains water from the water tank equipped with water inlet and outlet, the spray device should continue to spray water in the process of work to avoid the problem of dust in the process of use. The position and quantity of water spray can be controlled by the operator.