Small Rear-Loading Garbage Trucks Maintenance

As the saying goes, “three points of repair and seven points of maintenance”, which is enough to see the importance of garbage truck maintenance. In such a rapid economic development, the sanitation garbage truck has become an essential sanitation tool in our lives, so the car can not be cheap light, late useful without repair.

To regularly check the wiring harness of small electric garbage truck connection, the main method is also visual, to see that the wiring harness of garbage truck will have wireless skin cracking, loose, poor contact and other phenomena. If there is no, it must represent normal. If there is, it needs to go to the after-sales service point of the garbage truck for further detailed inspection.

When the engine of a small electric garbage truck is in the heat engine state, do not open the radiator cover, otherwise it may be burned by the spilled cooling liquid or high temperature steam. After the engine is cooled, check the liquid level of the coolant should be between the full position and the low position, otherwise it should be added distilled water or purified water (can not add mineral water) or frozen liquid, and the liquid level height after water can not exceed the full position. If it is found that the coolant decreases quickly within a short time, it should check whether there is leakage in the cooling system or go to the maintenance station for inspection.

Small electric garbage truck air filter is too dirty will cause poor engine work, high fuel consumption, damage the engine, etc., check the air filter, if found less dust, blockage is light, available high pressure air blowing from inside out, continue to use. Too dirty air filter should be replaced in time.